New GenX Electric Stacker

  • Drive motor with reduction gear assy and tyre.
  • Unique bushless floated mounting system for tandem load wheels.
  • Tilting mast for smaller lift height & fixed mast with tilting fork carriage for higher lift heights for enhancedstability.
  • Open mounting system of all parts totally accessible from operator side.
  • Compact hydraulic power pack system.
  • Mosfet electronic control system mounted on waist level for easy maintenance.
  • Drive unit system nested in large bushes.
  • State of the art control handle with gas spring & buffer springs.
  • Integral electromagnetic break on traction motor for no slip sure stop.
  • Compressive type tilt jack mtg for zero failure

Manual Stacker

MODEL SFHD1025 SFH1516
Capacity kg 1000 1500
Min.fork height (H2) mm 85 85
Lifting height (H3) mm 2500 1600
Min. mast height mm 1830 1980
Size of the fork (e) mm 150/160/x60 150/160×60
Length of fork (L) mm 900/1150 900/1150
Width of fork (adjust/fixed) (b5) mm 330 ~740/550 330 ~740/550
Min. turning radius mm 1250 1250
Weight mm 300 260
Fork roller kg θ74×70 θ74×70
Support wheel mm θ160×50 θ160×50
  • Heavy duty designed with quality mast construction
  • Drop forged forks straddle leg designed suitable for double side pallet
  • Light and easy manual steering system
  • Economic but reliable
  • CE Certified and Confirms to EN 1757-1

Particulars given in mm aren’t binding and the firm can make any change without notice. The specification may vary ± 10% due to manufacturing tolerances.

Electrick Stacker

We build the most robust and advance material handling eqipments across the globe

  • Variable speed totally enclosed generously rated 8kw motor.
  • The mast unit is indentpendently mounted on the chassis making it’s removal easy.
  • Higher voltage batteries (48v) are used for better efficiency.
  • Variable speed totally enclosed generously rated 8kw motor.
  • Higher voltage batteries (48v) are used for better efficiency.
  • The mast unit is indentpendently mounted on the chassis making it’s removal easy.
  • Higher voltage batteries (48v) are used for better efficiency.

Battery Operated Stacker

We build the most robust and advance material handling eqipments across the globe

L1 Overall Length 1422mm
L2 Rear Power Unit to face of fork 795mm
L3 Length of fork 750mm
B1 Wheel Base 1162mm
C1 Turning Radius 1355mm
UC Under Clearance – Leg 40mm
UC Under Clearance – Leg 40mm
H5 Height of Leg 85mm
H3 Height of mast (Lowered) 1860mm
H2 Height of Lift 2650mm
H1 Overall Height (Raised) 3150mm
H4 Free Lift 280mm
W2 Width of Power Unit 825mm
W1 Width Over Leg 530mm
W3 Max. Fork Spread 750mm
W4 Width Between Legs 220mm
W5 Width of Fork 76mm
G1 Rear Overhang 220mm
Load Wheel (steel) Dia 83mm
Drive wheel (Cushion Rubber) Dia 254mm
Laden Unladen
Travel Speed 3.6km/hr 4.8km/hr
Lifting Speed 10.8mtr./min 18mtr./min
Lowering Speed 18mtr/min 10.8mtr/min.

Capacity : 1000kg. (uniformly distributed)

Body Steel Fabrication

Battery 24V Traction Battery , 223AH at 5 hours rate of discharge Battery charger – 24V/30Amps

Lifting/Lowering The motor is energised by a micro-switch, through a contactor, actuated by the control valve lever , thus ensuring running of the motor only while lifting. Lowering is done by the same lever, pushed in the opposite side and the forks come down of their own weight.

Travelling Driven by1 HP 24V motor through a double reduction chain drive. Two stage traction speeds , controlled by micro-switches operated by finger controlled forward/reverse push buttons , located at the steering handle.

Steering The complete drive unit is mounted on a trunnion and is supported by heavy duty ball & roller bearings . This entire unit is rotated by a control handle for steering the truck.

Brakes The control handle, through a cam and link arrangement , actuate a pair of brake shoes, which operates on a brake drum, directly mounted on the traction motor shaft. The brakes are on when the control handle is either in vertical or horizontal position. The control handle is spring loaded and remains in the vertical position when released.

Electric ControlTwo stage traction speeds by finger controlled push buttons which operate 24V heavy duty contactors. Lever operates the Hydraulic Motor through mirci-switch.

Electronics May be supplied as Optional Control for Traction at additional price.

  • Variable speed totally enclosed generously rated 8kw motor.
  • The mast unit is indentpendently mounted on the chassis making it’s removal easy.
  • Higher voltage batteries (48v) are used for better efficiency.
  • Variable speed totally enclosed generously rated 8kw motor.
  • Higher voltage batteries (48v) are used for better efficiency.
  • The mast unit is indentpendently mounted on the chassis making it’s removal easy.
  • Higher voltage batteries (48v) are used for better efficiency.

Particulars given in mm aren’t binding and the firm can make any change without notice. The specification may vary ± 10% due to manufacturing tolerances.