Service Hours
Help Desk
Mail Us
We build the most robust and advance material handling eqipments across the globe
| L1 | Overall Length | 1422mm |
| L2 | Rear Power Unit to face of fork | 795mm |
| L3 | Length of fork | 750mm |
| B1 | Wheel Base | 1162mm |
| C1 | Turning Radius | 1355mm |
| UC | Under Clearance – Leg | 40mm |
| UC | Under Clearance – Leg | 40mm |
| H5 | Height of Leg | 85mm |
| H3 | Height of mast (Lowered) | 1860mm |
| H2 | Height of Lift | 2650mm |
| H1 | Overall Height (Raised) | 3150mm |
| H4 | Free Lift | 280mm |
| W2 | Width of Power Unit | 825mm |
| W1 | Width Over Leg | 530mm |
| W3 | Max. Fork Spread | 750mm |
| W4 | Width Between Legs | 220mm |
| W5 | Width of Fork | 76mm |
| G1 | Rear Overhang | 220mm |
| Load Wheel (steel) Dia | 83mm | |
| Drive wheel (Cushion Rubber) Dia | 254mm |
| Laden | Unladen | |
|---|---|---|
| Travel Speed | 3.6km/hr | 4.8km/hr |
| Lifting Speed | 10.8mtr./min | 18mtr./min |
| Lowering Speed | 18mtr/min | 10.8mtr/min. |
Capacity : 1000kg. (uniformly distributed)
Body Steel Fabrication
Battery 24V Traction Battery , 223AH at 5 hours rate of discharge Battery charger – 24V/30Amps
Lifting/Lowering The motor is energised by a micro-switch, through a contactor, actuated by the control valve lever , thus ensuring running of the motor only while lifting. Lowering is done by the same lever, pushed in the opposite side and the forks come down of their own weight.
Travelling Driven by1 HP 24V motor through a double reduction chain drive. Two stage traction speeds , controlled by micro-switches operated by finger controlled forward/reverse push buttons , located at the steering handle.
Steering The complete drive unit is mounted on a trunnion and is supported by heavy duty ball & roller bearings . This entire unit is rotated by a control handle for steering the truck.
Brakes The control handle, through a cam and link arrangement , actuate a pair of brake shoes, which operates on a brake drum, directly mounted on the traction motor shaft. The brakes are on when the control handle is either in vertical or horizontal position. The control handle is spring loaded and remains in the vertical position when released.
Electric ControlTwo stage traction speeds by finger controlled push buttons which operate 24V heavy duty contactors. Lever operates the Hydraulic Motor through mirci-switch.
Electronics May be supplied as Optional Control for Traction at additional price.
Particulars given in mm aren’t binding and the firm can make any change without notice. The specification may vary ± 10% due to manufacturing tolerances.